OUCO Garbage Hydraulic Scrap Metal Double Clamshell Grab Crane Monorail Grab
Product Description
These grabs are specially designed for charging and discharging of sand, gravel and other bulk materials and are also available in an execution for digging or dredging purposes.
The grabs can be executed with open or closed shells with dust covers, depending on the job and the type of material to be handled.
The grabs are manufactured of high wear resistant steels. All bearings are heavy-duty and sealed for high performance.
Product Feature
1. The grabs have high dead weight.
2. The spaces between the shells are relative small to minimise the risk of material loss.
3. The grab hydraulic cylinders are fitted with replaceable piston rod protections and are hydraulically cushioned.
4. Wide opening ranges guarantee a good penetration and release behavior.
Technical Parameters
| Model | 2Dxx-xx |
| Lifting Weight (t) | 2.5 | 3.0 | 3.0 | 3.0 | 3.0 | 3.0 | 5.0 | 5.0 | 5.0 | 5.0 | 5.0 | 6.0 | 8.0 | 8.0 | 8.0 | 10 | 10 | 10 |
| Grab Weight (t) | 1.01 | 1.49 | 1.15 | 1.46 | 1.46 | 1.70 | 2.38 | 2.38 | 2.0 | 2.25 | 2.20 | 2.22 | 3.94 | 3.7 | 3.64 | 4.9 | 4.60 | 4.36 |
| Grab Volume (m³) | 0.7 | 1.0 | 1.1 | 1.5 | 1.7 | 2.0 | 1 | 1.6 | 1.8 | 2.5 | 2.7 | 2.5 | 1.6 | 3.0 | 4.0 | 2.0 | 3.4 | 5.0 |
| Load Capacity(t) | 1.4 | 1.5 | 1.85 | 1.54 | 1.54 | 1.31 | 2.6 | 2.6 | 3.0 | 2.75 | 2.8 | 4.0 | 4.0 | 4.3 | 4.36 | 5.1 | 5.4 | 5.64 |
| Fulls | 5 | 5 | 3 | 3 | 3 | 3 | 5 | 5 | 4 | 3 | 4 | 5 | 5 | 5 | 3 | 5 | 5 | 3 |
| A(m) | 1.03 | 1.18 | 1.20 | 1.30 | 1.35 | 1.45 | 0.97 | 1.40 | 1.50 | 1.50 | 1.62 | 1.40 | 1.80 | 1.65 | 1.81 | 1.60 | 1.78 | 2.01 |
| B(m) | 1.65 | 1.95 | 2.05 | 2.24 | 2.24 | 2.28 | 2.42 | 2.40 | 2.26 | 2.56 | 2.42 | 2.48 | 2.20 | 2.75 | 3.00 | 2.50 | 2.94 | 3.20 |
| C(m) | 1.82 | 2.37 | 2.35 | 2.84 | 2.84 | 2.60 | 2.76 | 2.76 | 3.04 | 3.04 | 3.04 | 3.01 | 2.70 | 3.13 | 3.53 | 2.65 | 3.18 | 3.90 |
| D(m) | 1.78 | 2.62 | 2.74 | 2.89 | 2.89 | 2.80 | 3.15 | 3.15 | 3.18 | 3.28 | 3.25 | 3.30 | 3.90 | 4.29 | 4.05 | 3.92 | 4.30 | 4.30 |
| E(m) | 1.66 | 2.11 | 2.26 | 2.38 | 2.37 | 2.25 | 2.54 | 2.54 | 2.66 | 2.67 | 2.82 | 2.62 | 2.98 | 3.29 | 3.45 | 2.99 | 3.31 | 3.55 |
| Wire Rope Diameter Φ(mm) | 17.5 | 16.0 | 17.5 | 17.5 | 17.5 | 17.5 | 18.5 | 18.5 | 18.5 | 18.5 | 18.5 | 19.5 | 25.5 | 25.5 | 25.5 | 28.5 | 28.5 | 28.5 |
| Pulley Diamrter Φ(mm) | 244 300 | 300 350 | 400 | 400 | 400 | 400 | 420 | 420 | 420 | 420 | 420 | 360 | 500 | 500 | 500 | 500 | 500 | 500 |
| Model | 4Dxx-xx |
| Lifting Weight (t) | 12.5 | 16 | 16 | 16 | 16 | 20 | 25 | 25 | 32 | 40 | 50 |
| Grab Weight (t) | 7.2 | 7.2 | 8.03 | 6.40 | 6.87 | 8.3 | 10 | 15.1 | 14.0 | 16.9 | 21.0 |
| Grab Volume (m³) | 7.8 | 2.8 | 3.1 | 5.05 | 9 | 11.5 | 16.6 | 5 | 22.5 | 23.1 | 23.2 |
| Load Capacity(t) | 5.4 | 9.0 | 8.0 | 9.5 | 9.0 | 11.7 | 15 | 9.9 | 18.0 | 33.1 | 29.0 |
| Fulls | 3 | 5 | 5 | 4 | 3 | 4 | 4 | 3 | 3 | 3 | 3 |
| A(m) | 2.60 | 1.58 | 1.76 | 2.30 | 2.19 | 3.19 | 3.46 | 2.30 | 4.00 | 4.02 | 4.36 |
| B(m) | 3.30 | 2.80 | 2.72 | 2.83 | 3.20 | 3.18 | 3.66 | 3.29 | 3.98 | 4.01 | 4.33 |
| C(m) | 3.91 | 3.33 | 3.36 | 3.78 | 4.29 | 4.34 | 4.90 | 4.07 | 5.34 | 5.48 | 5.90 |
| D(m) | 4.90 | 4.32 | 4.58 | 4.26 | 4.94 | 4.91 | 5.42 | 5.16 | 5.76 | 7.21 | 8.07 |
| E(m) | 4.15 | 3.62 | 3.68 | 3.88 | 4.32 | 4.37 | 4.86 | 4.66 | 5.04 | 6.18 | 6.96 |
| Wire Rope Diameter Φ(mm) | 23.5 | 25.5 | 25.5 | 26 | 25.5 | 28 | 32.5 | 36.5 | 36 | 43 | 46 |
| Pulley Diamrter Φ(mm) | 600 | 700 | 600 | 600 | 600 | 640 | 710 | 930 | 710 | 1120 | 1210 |
Product Details
FAQ
1. Q:In the material, how should we choose and determine?
A:The selection of the material of the grab edge plate, generally speaking, is the use of high strength wear-resistant steel plate.
2. Q:Electric grab, its use in the process should pay attention to what aspects?
A:In use process, should pay attention to the wire rope and the important parts, because, if the improper use of words, then, the prone to breakage, so we must have enough attention.
3. Q:Which is an important way to improve service life?
A:The important way to improve the service life of the grab bucket is to improve the abrasion resistance of the grab pin and shaft sleeve, and to improve the abrasion resistance of the blade of the bucket body.
4. Q: The type of grab and its span size, whether will affect the grab price?
A:The type of grab, such as the hook or double hook, will affect the price of the grab, because the type is different, then the corresponding price is also different. As for the span of the grab, it is also one of the factors affecting the price of the grab, so it will certainly have an impact.
Product Tags:
|
|
Double Clamshell Grab Bucket , Scrap Metal Monorail Clamshell Bucket Durable Images
|
